Macbelt PVC Conveyor Belts
Macbelt PVC Conveyor Belts is conveyor and process belting for food and pharmaceutical and all general conveying and
processing applications from light duties to heavy duties. There are multiple fabrics coated with PVC and Rubber, etc. The general applications of these types are available good and resistant to water, oils, fats, chemicals solvents, high resistance to flex fatigue, high resistance to impact, excellent wear resistance & durability and easy to clean surfaces and other specifications.

PVC is a highly versatile thermoplastic which has contributed to the very wide range of applications possible with Macbelt PVC conveyor belts. We have 48 standard types of conveyor belts in our ex-stock range and 120 customized types with many more on a special or Full Roll basis.
The ex-stock range comprises a variety of smooth and grip top surfaces combined with several fabric grades resulting in a range of belt thicknesses. A specialist range of Flame Retardant (Self Extinguishing) belts made to the ISO 340 standard are included for
applications where fire is a particular risk.

These products are based upon 3 specially engineered polyester fabrics using combinations of monofilament and multifilament yarns with warp threads alternatively Z and S twisted, ensuring excellent physical qualities such as lateral stability and trackability, combined with low stretch. Our product range is made up of 2, 3, 4 ply constructions with solid colors PVC interplies and a range of top surface coating thicknesses and colors. Coloured product types feature a dry or uncoated underside to reduce slide-bed friction. Special constructions are available for troughing and corner bend applications. Additionally Low Noise fabrics are a feature of many of our coloured PVC range. All white belt types have sealed undersides and are made from FDA approved materials. Macbelt PVC Conveyor Belts is resistant to water, oils, fats and many
chemicals and solvents.

The belts can be made endlessly with several joint types, with selection being dependent upon the application and users’ preference. Our available joint types are Finger Overlap Finger, Finger, Stepped Overlap. and Mechanical fasteners are an alternative, and
a wide range is available to suit the belt application requirements. There are many types of PVC conveyor belts to choose from as follows: CB2VM05W, CB2VM06G, CB2VM07W, CB2VM08G, CB3VM08G CB2VM09W, CB3VT09W, CB2VM09BE, CB2VT10W, CB2VT10BE, CB3VT10W, CB2VM11G, CB2RT12BK, CB3RT12BK, CB2VM15G, CB2VM16W, CB2VM17W, CB3VT09BE, etc. For further details or documents of any of our product models, please contact us directly via the Contact Us button below.

Macbelt PU Conveyor Belts
Macbelt PU Conveyor Belts develops to meet the most stringent demands of the food
& pharmaceutical industries, for lightweight, hygienic and longlife belts. The base fabrics
are 100% polyester, with combinations of spun, multi- and mono-filament yarns. The polyurethane coating is thermoplastic and has FDA & USDA approval for handling unwrapped foodstuffs. Macbelt PU Conveyor belts also complies with UK & EEC (90/128) legislation concerning “Plastics in Contact with Food”.

BELT FEATURES : Wearability of the PU coated belts, a combination of durable polyester fabric and high grade polyurethane coating gives high resistance to flex fatigue even on knife edge transfers; it also ensures no surface cracking or crazing. It has a greater resistance than pvc to a large range of chemicals, particularly animal & vegetable oils. Flexibility of the belts are manufactured to negotiate knife edges as small as 3mm diameter.

Joinability of the PU coating is thermoplastic and can be easily fused in a heated press, in a short time and without adhesives. All Macbelt PU Belts types have finger-joint capability. Suitability of the belt surfaces have very good hold but no tack. They give clean release at delivery point. They can be cleaned easily and repeatedly without deterioration. The top surface are available gloss, matt and embossed. There are many types of PU conveyor belts to choose from as follows: CB1UM01W, CB1UM01BE, CB2UM03W, CB2UM02BE, CB2UM02W, CB3UM02W, CB1UM03G, CB2UM03G, CB3UM03G, CB2UM04W, etc.

Macbelt DR3 Hygienic Belts
Macbelt DR3 Hygienic Belts is monolithic belts and homogeneous belts

Macbelt DR3 Hygienic Belts is conveyor belts no fray edge belts used all life time that very strong as monolithic. It may be better traditional homogeneous solid thermoplastic and both way we can make positive drive belting, both designs are available Full Drive and Center Drive.

Macbelt DR3 Hygienic Belts means Deep Reinforced 3mm or Diameter 3mm of both edge. to solve the belt problem about such as weak elongation problem and elongation as wave on the top until running not flat smooth because physical problem of traditional homogeneous belt.

In order to enhance the service life, level of protection and safety of our Macbelt DR3 Hygienic Belts, we provide these belts with no fray edges. This results in a belt that becomes hermetical to all external attacks. The fabric carcass is completely coated with TPU which ensures that no contamination or liquid penetration occur. The Macbelt DR3 Hygienic Belts is therefore protected against all bacteriological or other micro-organism attacks. TPU protect edges. Protection against all contamination 100% TPU inert and non-porous 100% suitable for immediate food contact EC and FDA Positive rounded pattern 100% protection against grease, liquids and contaminants.

With over 30 years of experience in the design and manufacture of thermoplastic belting products, Macbelt is committed to providing our customers with quality, application-based solutions.

Hygienic, Macbelt DR3 Hygienic Belts construction with no fray egde of the belt and with fully molded teeth decreases bacteria contamination.

Easy to clean construction reduces water consumption by up to 70%.

Excellent resistance to oils and greases and
excellent cut & abrasion resistance.

Deep tooth design eliminates slippage and provides optimum sprocket engagement for maximum drive.

Zero tension belt system reduces stress on conveyor components such as bearings and shafts, and increases belt life.

Easy to make thermojoints as strong as original belt and very strong splice or butt splice minimizes downtime.

Durable sprockets in multiple sizes.

Easy for replacement from modular belts to Macbelt DR3 Hygienic Belts.

There are many types of DR3 Hygienic Belts Conveyor Belts to choose from as follows: DR3, DR3SD, DR3ESD, DR3FD, DR3SD/FD, DRESD/FD
DR3CD, etc.

Macbelt DR3 Hygienic Belts. There are many types to choose from as follows:
DR3,
DR3CD,
D3FD.

DR3

Friction drive belt (Friction roller rive): FTD

Friction surface of roller drive

Smooth surface both side

Normally tension

(safety factor calculate carefully)

More save

(Energy and increease productivity)

Preview of Product

Friction Drive Belts (FTD)

: DR3

Friction Drive Belts (FTD)

Request More Information

DR3CD

• Sprocket drive belts-center drive (Self tracking positive drive) : SPD-CD

Sprocket teeth of sprocket drive

Teeth full the ntire width

Zero tension

(Reduces stresson compoents)

Very many save

(Maintenance, energy and increase productivity)

Preview of Product

Sprocket Drive Belts-Center Drive (SPD-CD)

: DR3CD

Sprocket Drive Belts-Center Drive (SPD-CD)

Self-tracking positive drive

Request More Information

DR3FD

• Sprocket drive belts-Full drive (Positive drive) : SPD-FD

Sprocket teeth of sprocket drive

Single and double rows of teeth

Zero tension

(Reduces stresson compoents)

Very many save

(Maintenance, energy and increase productivity)

Preview of Product

Sprocket Drive Belts-Full Drive (SPD-FD)

: DR3FD

Sprocket Drive Belts-Full Drive (SPD-FD)

Positive drive

Request More Information

Showing 1–16 of 24 results